3-4 | Synopsis |
5-34 | Canada's Oil Sands: Opportunities and Challenges to 2015 |
35-50 | Oil Sands Economics |
51-66 | The Oil Sands of Canada: 300% Growth; Buy and Hold... and Hold and Hold |
67-70 | Synopsis |
71-114 | Incorporating Climate Change Considerations in Environmental Assessment: General Guidance for Practicioners |
115-126 | Expanding the Scoping Community |
127-146 | Barriers to Implementation of Cumulative Effects Assessment |
147-152 | Synopsis |
153-204 | Regional Sedimentology, Sequence Stratigraphy and Petroleum Geology of the Mannville Group: Southwestern Saskatchewan |
205-228 | The Clearwater Formation, Cold Lake, Alberta: A worldclass hydrocarbon reservoir hosted in a complex succession of tide-dominated deltaic deposits |
229-256 | An Atlas of Lithofacies of the McMurray Formation Athabasca oil sands deposit, Northeastern Alberta: Surface and Subsurface |
257-284 | Regional Geology and Sedimentology of the basal Cretaceous Peace River oil sands deposit, north-central Alberta |
285-294 | Seismic Monitoring of steam-based recovery of bitumen |
295-300 | Reservoir Monitoring and characterization for heavy oil thermal recovery |
301-306 | Techniques applied to obtain very high resolution 3-D imaging at an Athabasca tar sands thermal pilot |
307-318 | Effective processing of non-repeatable 4-D seismic data to monitor heavy oil SAGD steam flood at East Senlac, Saskatchewan, Canada |
319-320 | Synopsis |
321-340 | SAGD Reservoir Characterization Using Geostatistics: Application to the Athabasca Oil Sands, Alberta, Canada |
341-356 | Fluvial Meandering Channelized Reservoirs: a Stochastic & Process-Based Approach |
357-374 | Geostatistical Models for Shales in Distributary Channel Point Bars (Ferron Sandstone, Utah): From Ground-Penetrating Radar Data to Three-Dimensional Flow Modeling |
375-396 | The Development of Appropriate Upscaling Procedures |
397-400 | Synopsis |
401-414 | Sand Production Caused by Foamy Oil Flow |
415-428 | Physics and Modeling of Thermal Flow and Soil Mechanics in Unconsolidated Porous Media |
429-438 | Evaluation of Reservoir Properties from Geomechanical Tests |
439-448 | Design of the Monitoring Program for AOSTRA's Underground Test Facility |
449-450 | Synopsis |
451-462 | Numerical Study of the SAGD Process in the Burnt Lake Oil Sands Lease |
463-470 | A New Combustion Process Using Horizontal Wells and Gravity Drainage |
471-478 | Effective Application of Steam Assisted Gravity Drainage of Bitumen to Long Horizontal Well Pairs |
479-494 | An Integrated Approach to Understanding Cold Production Mechanisms of Heavy Oil Reservoirs |
495-498 | Synopsis |
499-506 | MacKay River SAGD Project Benefits from New Slant Rig Design |
507-510 | Application of Top Drive Drilling to Horizontal Wells |
511-418 | Magnetic Ranging Technologies for Steam Assisted Gravity Drainage and Unique Well Geometries |
519-528 | Implementation of Advanced Cementing Techniques to Improve Long Term Zonal Isolation in Steam Assisted Gravity Drainage Wells |
529-532 | Synopsis |
533-542 | Application of Intelligent System (DES PCP) for Monitoring Progessing Cavity Pumps |
543-550 | Mobil's SAGD Experience in Celtic, Saskatchewan |
551-564 | Field Implementation of Solvent Aided Process |
565-574 | Field Test of Electrical Heating with Horizontal and Vertical Wells |
575-578 | Synopsis |
579-590 | LC-Fining: Recent Innovations Enable Refiners to Produce Clean Fuels at High Conversions |
591-600 | The Start-up of the Bi-Provincial Upgrader |
601-608 | Processing Oilsands Bitumen is Syncrude's R&D Focus |
609-624 | The Long Lake Project - The First Field Integration of SAGD and Upgrading |
625-628 | Synopsis |
629-640 | Investigation of SAGD Steam Trap Control in Two and Three Dimensions |
641-650 | Proposed Air Injection Recovery of Cold-Produced Heavy Oil Reservoirs |
651-668 | Mechanism of the Vapor Extraction Process for Heavy Oil and Bitumen |
669-684 | Tracking Cold Production Footprints |